How To Reglaze A Bathtub?
The Task Of Reglazing Your Bathtub
Think that your bathtub is in dire need of replacement but don’t want to waste your entire weekend doing this tedious and boring job? If the answer is in the affirmative then tub reglazing is just the right option for you. This will not take you more then 4 to 5 hours and your bath tub will be as good as new.
You may be wondering if you can do the daunting task of reglazing all by yourself. The answer is, you definitely will if you take care of a few things. The first thing that you have to remember while reglazing is your own safety. This can prove to be fatal if all thecorrect protective measures are not taken. You should cover every possible part if your body as the chemicals used in the process is toxic. It is advisable that you do the work in an open area.
Now you are armed and ready to handle the bathtub resurfacing situation. Clean your bathtub properly.
It is advisable to remove the caulk and gasket while you are cleaning the tub. Your bath refinishing kit generally has a wide array of chemicals. The first two chemicals are supposed to function as cleaning material. You need to apply the first solution and thoroughly scrub the surface. Once you are done with that apply the second cleaning solution which will make the surface rough and sore.
You have to then make sure that the surface is absolute oil free otherwise the primer will not be effective. The third solution that comes with the kit is basically used to remove all the leftover sediment. Now your bathtub is ready for the primer. You should use hand towels while applying the reducer. After about thirty minutes clean the surface with primer reducer and then let it stand to dry. You must ensure that the surface is completely dry before getting in the next stage.
Next you have to cover the portion where tub refinishing is not required . You should carefully cover those areas with paper tape and check the seal. Ensuring the safety procedure is a must in these circumstances. Now you can put base coat onto the remaining area. Keep in mind that ventilation is very important during this process and if possible you should use a respirator. Mix the primer’s solution according to the manufacturer’s guide. Following the instructions given the guide is of prime importance and should not be neglected at all. After ensuring that you can start applying the base coat with a spray gun
Now you are almost done refinishing your bathtub.
All you need to do now is color your tub according to your wish. Follow the manufacturer’s direction while mixing the paint for the topcoat. After the primer has been applied for thirty minutes or so you can apply the topcoat. For applying the topcoat also you may use a spray gun. After you have applied the topcoat wait for 48-72 hours before using your bath tub. Rather your reglazed bath tub!!
Toby Rutherford is a accepted expert on Bathtub reglazing. To find all your queries clarified regarding tub resurfacing visit his blog on bath tub refinishing.
To find out more on reglazing your bathtub and other home improvements, go to U Wanted 2 Know
A Fun Fact...
Powered By WPFacts
![Validate my RSS feed [Valid RSS]](http://uwanted2know.com/images/validrssrogers.png)


July 31, 2010
|
Posted by Just Doin Reviews Guru
Categories:
When I lived in an apartment without a grill I experimented until eventually I learned a great way for slow cooking baby back ribs in the oven. Great BBQ ribs were one food I missed making for myself and close friends and could under no circumstances discover genuinely excellent kinds inside a restaurant.










